How much does it cost to call the United States from Iran with Sayfone?

Calls to the United States cost 8¢ per minute. Sayfone shows the rate transparently before each call, and you are billed only for the minutes you use—transparent per-minute pricing or hidden fees.

Do I need to download an app to call?

No. Sayfone is browser-based, so you can call from any device with an internet connection and a web browser. No app download or installation is required.

What is the dialing format for US numbers?

Dial +1 (the US country code), then the 10-digit number: [3-digit area code] + [7-digit local number]. For example, +1-212-555-0100 for a New York number.

Can I call US mobile phones the same way as landlines?

Yes. US mobile and landline numbers both use the same 10-digit format and the +1 country code. You dial them identically.

What if my call does not connect?

Check that you have entered the correct +1 country code and 10-digit number. Verify your internet connection. Try again after a few seconds. If the problem persists, contact Sayfone support.

Can I call toll-free numbers (800, 888, etc.) from Iran?

Toll-free and special-rate numbers may not be reachable internationally. Standard US landlines and mobile numbers are always supported.

What is the best time to call from Iran to the United States?

Iran is typically 8.5 to 12.5 hours ahead of US time zones (depending on daylight saving time). Best business call times are Iran evening (6:00 PM – 9:00 PM), which aligns with US morning to early afternoon.

Is there a minimum or maximum call duration?

No. You can call for as little as one minute or as long as you need. Billing is transparent and per-minute, so you control your call costs.

Quick Answer

How to Call the United States from Iran

To call the United States from Iran, dial your Sayfone access code, then +1 followed by the 10-digit US phone number. Calls cost 8¢ per minute with transparent, per-minute billing.

Start calling

Cost tools

🇮🇷From Iran

To United States🇺🇸

$0.08

Per minute

Country code

Call quality

Landline rate

$0.08/min

Mobile rate

$0.08/min

Same per-minute Sayfone rate for landline and mobile.

Average call quality

Steps at a glance

Enter your Sayfone access code
Dial +1 (US country code)
Enter the 10-digit US number
Place your call

DIALING INSTRUCTIONS

Step-by-Step: Dialing the United States from Iran

Follow these steps to connect your call from Iran to any US landline or mobile number.

Enter Your Sayfone Access Code
Log in to Sayfone or enter your account credentials to access the dialer. This connects your session to your account for transparent per-minute billing.
2
Dial the Country Code for the United States
Enter +1, the international country code for the United States. This tells the network you are routing to a US number.
```
+1
```
3
Enter the Area Code
Type the 3-digit area code for the region you are calling in the United States. This identifies the geographic area or carrier.
```
(212) for New York, (310) for Los Angeles, (415) for San Francisco
```
4
Enter the Local Number
Dial the remaining 7-digit local number. US local numbers follow the format: 3-digit area code + 7-digit subscriber number.
```
+1-212-555-0100
```
Press Call
Review the displayed number and rate, then press Call to connect. Your call will be billed at 8¢ per minute.

Dialing format reference

Use these patterns when entering a full international number to +1.

Mobile

+1 [3-digit area code] [7-digit number]

Landline

+1 [3-digit area code] [7-digit number]

+1-212-555-0100
+1-310-555-0200
+1-415-555-0300

Major city area codes

New York212

Los Angeles310

Chicago312

Houston713

San Francisco415

Sources

1
ITU-T Recommendation E.164: International Public Telecommunication Numbering Plan
Country code and numbering format verification

DIALING RULES

Key Dialing Rules for United States Calls

Understand the dialing format and rules specific to reaching US numbers from Iran.

Use +1 for All US Numbers

Always dial +1 before the 10-digit US number, whether calling from Iran or any other country. This is the universal format for US-bound calls.

10-Digit Format: Area Code + Local Number

US phone numbers are 10 digits long: a 3-digit area code followed by a 7-digit local number. Both area codes and local numbers must be dialed in full.

No Leading Zero After Country Code

After dialing +1, do not add a leading zero. Dial the area code and local number directly: +1-XXX-XXX-XXXX.

Same Format for Landlines and Mobile Numbers

US landlines and mobile numbers follow the same 10-digit format. You cannot distinguish between them by the number alone; both are dialed +1-[area code]-[number].

International Calls May Experience Delays

Calls from Iran to the United States may have slight transmission delays due to international routing. This is normal and does not indicate a problem.

CALLING TIPS

Best Times to Call the United States from Iran

Maximize connection quality and minimize costs with timing and practical calling strategies.

Time & windows

Iran Evening / US Morning

Iran: 6:00 PM – 10:00 PM

US: 8:30 AM – 12:30 PM (EST/CST/MST/PST vary)

Iran Early Morning / US Evening

Iran: 12:00 AM – 6:00 AM

US: 3:30 PM – 9:30 PM (EST/CST/MST/PST vary)

🇮🇷Best for Business Calls

Iran 6:00 PM – 9:00 PM (US morning to early afternoon)Most US offices are open; clear connections typically available

🇮🇷Good for Personal Calls

Iran 12:00 AM – 3:00 AM (US early evening)After work hours; avoid calling too late into US night

🇮🇷Avoid

Iran 9:00 AM – 3:00 PM (US late night to early morning)Most US recipients will be sleeping

Calling tips

Iran does not observe daylight saving time, but the United States does. Adjust your timing by an hour during US DST transitions (mid-March to early November).
US time zones span from Eastern (UTC−5/−4) to Pacific (UTC−8/−7). Confirm your contact's time zone before calling during off-hours.
Call quality is generally stable on established routes; brief international delays are normal and do not indicate a bad connection.
Use Sayfone's transparent per-minute billing to budget calls in advance. Track your call duration for predictable costs.
If the call does not connect after 30 seconds, check the dialed number and try again; international routing occasionally requires a retry.

Business etiquette

Always confirm the time zone with your US contact before scheduling a call. A time that seems convenient in Iran may be very early morning or late evening in the US.
When calling US businesses, use standard business hours (9:00 AM – 5:00 PM local time in the recipient's time zone) for the best reception.
Introduce yourself clearly and state the purpose of your call early, especially across international lines where clarity is important.
Be respectful of time differences; plan calls in advance rather than making unscheduled calls during sleeping hours.
Use email or messaging for non-urgent matters to avoid premium call timing or unexpected interruptions.

TROUBLESHOOTING

Troubleshooting & Technical Notes

Solutions to common calling issues and important considerations for Iran–US calls.

Call Does Not Connect

Verify the 10-digit US number is correct, including the 3-digit area code. Confirm you have dialed +1 before the area code. Check your internet connection if using browser-based calling. Try the call again after 30 seconds.

Poor Audio Quality or Delays

International calls may experience brief transmission delays (typically under 1 second) due to satellite or terrestrial routing. This is normal. If audio is garbled or very delayed, try ending the call and reconnecting.

Special Numbers May Not Work

Some special numbers—such as emergency services (911), toll-free numbers (800, 888, 877, 866), or premium rate lines—may not be reachable from Iran. Standard landlines and mobile numbers are always supported.

Billing or Account Issues

Sayfone displays transparent per-minute pricing before each call. Verify the rate (currently 8¢/min for US calls) and your account balance before dialing. Contact Sayfone support if charges appear incorrect.

Savings

See what you could save

Adjust the tools below to compare Sayfone with typical retail pricing for calls to United States. Start with one call, then layer on monthly volume to see the bigger picture.

How to use these tools

Sayfone uses your live rate for calls to United States — the same basis as the rest of this page.
First, estimate savings on a single call length. Then, model a full month of minutes versus typical retail benchmarks.
Retail competitor rows are illustrative — not a quote from any carrier.