Always omit the leading 0 from the area code
UK domestic numbers begin with 0 (e.g., 020 for London), but international dialing requires you to drop this. Dial the code without the 0 after +44.
Quick Answer
Dial +44 followed by the UK area code (without the leading 0) and the local number. Calls typically connect in seconds.
$0.08
Per minute
+44
Country code
HD
Call quality
Landline rate
$0.08/min
Mobile rate
$0.08/min
Same per-minute Sayfone rate for landline and mobile.
Average call quality
Steps at a glance
Sources
Country code authority
UK numbering plan reference
DIALING INSTRUCTIONS
Follow these steps to dial any UK number. The process is the same for landlines and mobiles; the difference is in the format of the local number itself.
From Pakistan, dial 00 (international access code) to initiate an international call. Some phones may accept + as an alternative.
00 or +
Dial 44, the country code for the United Kingdom.
44
UK numbers are written with a leading 0 for domestic calls, but you must omit it when calling internationally. For example, London's area code is written as 020 domestically, but you dial 20 when calling from abroad.
20 (for London: remove the 0 from 020)
Complete the call by entering the subscriber number. The full dialed sequence is now complete.
7946 0958 (for a London number)
Dialing format reference
+44
Use these patterns when entering a full international number to +44.
Mobile
+44 7XXX XXXXXX or +44 7XXX XXXXXX (variable length, typically 10 digits after +44)
Landline
+44 (area code without leading 0) + local number (e.g., +44 20 XXXX XXXX for London)
Major city area codes
Sources
Country code and number formatting
UK dialing plan
KEY RULES
Follow these rules to ensure your call connects without errors. UK numbering has specific conventions when dialing internationally.
UK domestic numbers begin with 0 (e.g., 020 for London), but international dialing requires you to drop this. Dial the code without the 0 after +44.
Mobile numbers in the UK use area codes beginning with 7 (e.g., 07911 123456). When dialing internationally, dial +44 7911 123456.
Both +44 and 0044 are valid international prefixes. The + format is more modern and widely accepted. Most phones automatically convert + to 00 when needed.
UK landline numbers are not uniform. London numbers (020) have 10 digits total after the country code; other regions may have 8 to 11 digits. Always use the full number provided.
BEST TIMES & TIPS
Time your calls to catch people in the UK during their business or personal hours. Use these practical tips to connect successfully.
UK Business Hours
9 AM – 5 PM GMT
Best time for work calls; offices are open and staffed
Pakistan Morning
2 PM – 10 PM PKT
These UK hours align with Pakistan afternoon and evening
Avoid Late Nights
After 8 PM GMT
Calls late at night in the UK are often intrusive
Sources
Time zone reference
TROUBLESHOOTING
Solve connection problems and avoid common dialing mistakes. Most issues are preventable with the right approach.
Check that you've dialed +44 (not +45 or another code) and that you've omitted the leading 0 from the area code. If the number is correct, the issue may be poor connectivity on your end. Move to a stronger signal or try again in a few minutes.
Verify the full number you're dialing, including the area code. Confirm the recipient has given you the correct number. Double-check that you've removed the leading 0 from the area code (e.g., dial 20, not 020, for London).
International calls can sometimes have slight delays or compression. This is normal. Speak clearly and pause slightly between sentences. If quality is very poor, hang up and try again; network congestion is usually temporary.
Some special numbers (premium-rate, toll services) may not be accessible or may incur higher charges. For regular landlines and mobiles in the UK, rates are standard. Confirm your calling plan rate before placing long calls.
Ensure you have an active international calling plan or sufficient credit. Some Pakistani carriers require you to activate international calling or purchase an international calling package. Contact your local operator if unsure.
Sources
UK dialing and service standards
Savings
Adjust the tools below to compare Sayfone with typical retail pricing for calls to United Kingdom. Start with one call, then layer on monthly volume to see the bigger picture.
How to use these tools
Set duration and country. See Sayfone vs. an illustrative retail rate for the same call.
I'm calling…
Enable enterprise discount
Save additional 40% (enterprise)
Your call
Your call will cost
$0.96
$0.080 per minute
That's 60% less than competitors
Set monthly minutes and call type. Bars compare Sayfone to common retail benchmarks for the same volume.
Drag slider to adjust
220
min / month
~$3.92/min
~$2.96/min
~$1.76/min
~$0.40/min
$0.080/min
Annual saving vs. AT&T
Based on 220 min/month
Before you go
Open the full Pakistan to United Kingdom guide, check rates, or browse other how-to guides from Pakistan.
Pakistan to United Kingdom calling guide
Per-minute rates, savings calculator, and what to expect on this route.
What it costs to call United Kingdom
See Sayfone’s per-minute rate for United Kingdom and how it compares before you dial.
Route guides from Pakistan
FAQ
Quick answers to common questions about calling the UK from Pakistan.
Still have questions? Contact our support team—we're happy to help with calling, billing, or technical issues.
Contact supportDISCOVER
Explore affordable calling rates to countries popular with callers from Pakistan.
Ready to Call?
Transparent per-minute pricing, no signup fees. Place your first call in seconds using transparent per-minute pricing.
The modern Skype alternative. No downloads, no contracts, just crystal-clear calls from any device, anywhere.