Always Drop the Leading 0
UK area codes include a leading 0 when dialing domestically, but you must remove it for international calls. For example, London's 020 becomes 20 when called from abroad.
Quick Answer
Dial 0011 + 44 + local number (without the leading 0). Calls to UK landlines and mobiles are just 8¢/min from your browser.
$0.08
Per minute
44
Country code
HD
Call quality
Landline rate
$0.08/min
Mobile rate
$0.08/min
Same per-minute Sayfone rate for landline and mobile.
Average call quality
Steps at a glance
HOW TO DIAL
Follow these exact steps to dial a UK number from Australia using Sayfone or any international phone service.
Start by entering 0011—this is Australia's international access code. On a mobile, you may also use + if your phone supports it.
0011 or +
Type 44, the country code for the United Kingdom. This tells your carrier you're dialing an international number.
0011 44
Enter the UK local number, but drop any leading 0 from the area code. For example, if the number starts with 020 (London), dial just 20.
0011 44 20 7946 0958
Review the per-minute rate and connect. Your call will route through your selected service.
Dialing format reference
44
Use these patterns when entering a full international number to 44.
Mobile
+44 7XXX XXXXXX (drop leading 0)
Landline
+44 20 XXXX XXXX (London); +44 161 XXXX XXXX (Manchester)
Major city area codes
Sources
Verify UK area codes and number formats
Confirm Australia's international prefix
KEY RULES
Understand UK numbering conventions to dial correctly every time.
UK area codes include a leading 0 when dialing domestically, but you must remove it for international calls. For example, London's 020 becomes 20 when called from abroad.
UK mobile numbers always begin with 7 after the country code. They are 10 digits long (e.g., +44 7911 123456). The format is consistent across all UK mobile carriers.
Landline numbers in the UK are typically 10 digits after the country code, but the pattern depends on the area. London (20), Manchester (161), and Birmingham (121) are the most common. Smaller cities may have longer area codes.
Unlike some countries, the UK does not require tone prefixes or special dialing sequences. Once you dial the number, the call connects directly.
TIMING & TIPS
Australia and the UK are significantly offset in time. Plan your calls to catch people during their waking hours and avoid off-peak costs.
Due to daylight saving time differences, the time gap varies between 8 and 10 hours. Use these guidelines to reach contacts during convenient times.
UK Morning (8 AM – 12 PM)
7 PM – 11 PM (Australia AEDT)
Best for business calls and catching professionals at their desks
UK Afternoon (12 PM – 5 PM)
11 PM – 4 AM (Australia AEDT)
Ideal for evening personal calls or catching people before they leave work
Early Morning Australia (6 AM – 9 AM)
8 PM – 11 PM (UK GMT)
Good for reaching UK contacts in the evening without waiting too late
Sources
Current GMT and UK timezone information
TROUBLESHOOTING
If your call to the UK doesn't go through, check these common causes and fixes.
Check that you've dialed 0011 44 and removed the leading 0 from the UK number. Verify the full number is correct (UK numbers should be 10 digits after the country code). If the issue persists, your internet connection may be unstable—move closer to your router or switch to mobile data.
Confirm the time in the UK. If it's late evening or very early morning, the contact may be asleep. Try calling during business hours (8 AM–6 PM UK time). If calling a mobile, the person may have their phone switched off or may not recognize your number.
Network conditions affect quality. If you hear echo, ask the other person to lower their speaker volume. On your end, ensure you're using a wired headset or moving to a location with stronger internet signal. Some older UK landlines may have naturally lower audio quality.
Many UK businesses route incoming international calls through an automated menu. Listen for prompts and follow the instructions to reach the correct extension. Have the person's direct dial or department name ready.
Savings
Adjust the tools below to compare Sayfone with typical retail pricing for calls to United Kingdom. Start with one call, then layer on monthly volume to see the bigger picture.
How to use these tools
Set duration and country. See Sayfone vs. an illustrative retail rate for the same call.
I'm calling…
Enable enterprise discount
Save additional 40% (enterprise)
Your call
Your call will cost
$0.96
$0.080 per minute
That's 60% less than competitors
Set monthly minutes and call type. Bars compare Sayfone to common retail benchmarks for the same volume.
Drag slider to adjust
220
min / month
~$3.92/min
~$2.96/min
~$1.76/min
~$0.40/min
$0.080/min
Annual saving vs. AT&T
Based on 220 min/month
Before you go
Open the full Australia to United Kingdom guide, check rates, or browse other how-to guides from Australia.
Australia to United Kingdom calling guide
Per-minute rates, savings calculator, and what to expect on this route.
What it costs to call United Kingdom
See Sayfone’s per-minute rate for United Kingdom and how it compares before you dial.
Route guides from Australia
Other how-to guides from Australia
FAQ
Quick answers to common questions about calling the UK from Australia.
Need more help? Contact our support team.
Contact supportReady to Call?
No app, transparent per-minute pricing, transparent pricing. Just transparent rates and reliable calling.
The modern Skype alternative. No downloads, no contracts, just crystal-clear calls from any device, anywhere.