Quick Start

How to Call China from Myanmar

Dial +86 followed by the local number. Sayfone calls to China cost 8¢ per minute.

Start calling
    🇲🇲From Myanmar
    To China🇨🇳

    $0.08

    Per minute

    +86

    Country code

    HD

    Call quality

    Landline rate

    $0.08/min

    Mobile rate

    $0.08/min

    Same per-minute Sayfone rate for landline and mobile.

    Average call quality

    Steps at a glance

    1. Enter international access code: 0
    2. Dial country code: +86
    3. Enter the local number (no leading 0)
    4. Review the rate and call

    DIALING GUIDE

    Step-by-Step Dialing Instructions

    Follow these simple steps to call any number in China from Myanmar using Sayfone or any international calling service.

    • Dial the international access code

      From Myanmar, start with 0 to access the international network.

      0
    • Enter China's country code

      After the access code, dial +86, which is China's international dialing code.

      0 86
    • Enter the local number

      Dial the recipient's phone number without the leading 0 (which is used for domestic calls within China). Landline numbers are typically 7–8 digits; mobile numbers are 11 digits.

      0 86 10 6513 0000 (Beijing landline) or 0 86 138 0000 0000 (mobile)
    • Review your rate and place the call

      With Sayfone, you'll see the per-minute rate before calling. Confirm and dial.

      Rate: 8¢ per minute

    Dialing format reference

    +86

    Use these patterns when entering a full international number to +86.

    Mobile

    +86 [digit] [8 digits] (total 11 digits)

    Landline

    +86 [area code] [7–8 digits]

    • +86 10 6513 0000 (Beijing)
    • +86 21 6068 8888 (Shanghai)
    • +86 138 0000 0000 (Mobile)

    Major city area codes

    Beijing10
    Shanghai21
    Guangzhou20
    Chengdu28

    Sources

    1. 1
      China country code and dialing plan

      Reference for China country code +86 and numbering structure.

    CALLING RULES

    Key Dialing Rules for China

    China has specific dialing conventions that differ between landlines and mobile phones. Understand these rules to ensure calls connect correctly.

    Landline numbers require area codes

    All landline calls to China require the area code (e.g., 10 for Beijing, 21 for Shanghai). Without the area code, the call will not connect.

    Mobile numbers are 11 digits total

    Chinese mobile numbers are 11 digits, beginning with +86 followed by a single digit (usually 1), then 9 additional digits. No area code is needed for mobiles.

    Do not include the leading 0 for international calls

    The leading 0 is only used for domestic calls within China. When dialing internationally, drop the 0 and begin with the country code +86.

    Toll-free and premium numbers may have restrictions

    Some special numbers (toll-free 400/800 numbers or premium-rate services) may not be reachable internationally. Standard landlines and mobile numbers work without issue.

    TIMING & ETIQUETTE

    Best Times to Call China from Myanmar

    China and Myanmar have different time zones. Plan your calls during business hours or evening hours to reach the person you're calling.

    Time & windows

    Myanmar Time

    UTC+6:30

    No daylight saving

    China Time

    UTC+8

    No daylight saving; 1.5 hours ahead

    🇲🇲Business hours (China)
    9:00 AM – 6:00 PM China time (7:30 AM – 4:30 PM Myanmar time)Best for reaching offices and businesses.
    🇲🇲Evening hours (China)
    6:00 PM – 10:00 PM China time (4:30 PM – 8:30 PM Myanmar time)Good for reaching people after work.
    🇲🇲Early morning (China)
    7:00 AM – 9:00 AM China time (5:30 AM – 7:30 AM Myanmar time)Acceptable but not ideal; many are still getting ready.

    Calling tips

    • Verify the local time in China before dialing to avoid calling too early or late.
    • Consider the recipient's work schedule; office hours vary by city and industry.
    • China observes no daylight saving time, so the time difference remains constant year-round.
    • Mobile calls may be answered outside business hours; landlines typically follow office hours.

    Business etiquette

    • Begin with a polite greeting in English or Mandarin if you know basic phrases.
    • Identify yourself and your company clearly at the start of the call.
    • Avoid calling during meal times (noon–1:30 PM, 6:00 PM–7:00 PM China time).
    • If reaching a business, ask for the right department or person to avoid transferring.
    • Keep calls concise and respectful of the recipient's time.

    Sources

    1. 1
      Time zone information: Myanmar (UTC+6:30) and China (UTC+8)

      Reference for time zone offset between Myanmar and China.

    TROUBLESHOOTING

    Common Calling Issues & Solutions

    If your call doesn't connect or you experience poor quality, here are the most common causes and practical fixes.

    Call doesn't connect or drops immediately

    Check that you've dialed the correct number without the leading 0, and verify the country code (+86) is included. If the number is correct, the recipient's network may have restrictions on international calls. Try again after a few minutes; temporary network congestion can cause drops.

    Poor call quality or one-way audio

    International calls over data networks (cellular data or Wi-Fi) can be affected by network congestion or signal strength. Switch to a more stable connection or try calling at a less busy time. Mobile networks in border regions may experience intermittent service; moving to a different location can sometimes help.

    Cannot reach toll-free or premium numbers

    Some special numbers (e.g., 400/800 toll-free, or premium-rate services) restrict international dialing. These are reserved for domestic use. Standard landlines and mobile numbers are not restricted.

    High latency or long delays

    International calls may experience 0.5–1 second of delay due to routing through multiple networks. This is normal and not a sign of a problem. Speak naturally and pause between sentences to avoid overlap.

    Savings

    See what you could save

    Adjust the tools below to compare Sayfone with typical retail pricing for calls to China. Start with one call, then layer on monthly volume to see the bigger picture.

    How to use these tools

    • Sayfone uses your live rate for calls to China — the same basis as the rest of this page.
    • First, estimate savings on a single call length. Then, model a full month of minutes versus typical retail benchmarks.
    • Retail competitor rows are illustrative — not a quote from any carrier.

    One call — instant savings

    Set duration and country. See Sayfone vs. an illustrative retail rate for the same call.

    I'm calling…

    12 minutes
    1 min10 min20 min30 min40 min50 min1 hr

    Enable enterprise discount

    Save additional 40% (enterprise)

    Your call

    Your call will cost

    $0.96

    $0.080 per minute

    Sayfone$0.96$0.080 / min
    Competitors$2.40$0.20 / min
    Your savings$1.44$0.12 / min

    That's 60% less than competitors

    Call China now

    Every month — stack it up

    Set monthly minutes and call type. Bars compare Sayfone to common retail benchmarks for the same volume.

    Drag slider to adjust

    220

    min / month

    AT&T / Verizon$862

    ~$3.92/min

    T-Mobile$651

    ~$2.96/min

    Calling cards$387

    ~$1.76/min

    Google Voice$88

    ~$0.40/min

    Sayfone$18

    $0.080/min

    Annual saving vs. AT&T

    Based on 220 min/month

    $10,138
    Try Sayfone Free

    Before you go

    Open the full Myanmar to China guide, check rates, or browse other how-to guides from Myanmar.

    QUESTIONS

    Frequently Asked Questions

    Quick answers to common questions about calling China from Myanmar.

    EXPLORE

    Other Popular Routes from Myanmar

    Once you've mastered calling China, explore affordable rates to other countries from Myanmar.

    Ready to Call?

    Start Calling China from Myanmar Today

    Connect with family, friends, or colleagues in China using Sayfone's transparent, affordable rates. Transparent pricing—just clear per-minute pricing.

    • 8¢ per minute to China
    • Transparent per-minute pricing—no surprises
    • Browser-based calling—no app required
    • Reliable connections from Myanmar to China